Instructions Q01, Q02, Q04 & Q05

I. Specifications

Input Power Supply

5V 2A

 

Lumens

120 LM

Output Power

5V

Control way

 

Light Source

RGB LED

Size of the Product (L x W x H)

4.1 x 3.5 x 1.2 IN

10.3 x 9 x 3 CM

Power Consumption

1.2W

Length of USB Cable

5 Feet/1.5 Meters



Ⅱ．Cautions

  1. Please only use a high-quality Adapter (Output 5V 2A) or the Lights will not work
  2. Do not connect more than ten (10) LED Lights on one
  3. Read the instruction of the remote controller (the other sheet with the remote ) before using the lights.

Ⅲ．Installation Instructions

  1. Insert the small USB PCB Boards with arrow to connect the Lights. Build a design shape of your choice. This is the signal-source for the lights. Put it in one light to make the light as the signal-source light. All the following lights need to follow the arrow on the USB connecting board to have the signal from the signal-source light. Keep the side with arrow of the connecting board and the face of the lights in the same side.
  1. Snap in the triangle Connectors on each corner of the Lights to keep the unit sturdy.
  2. Insert the USB Cable into the Find the USB Port on the Light closest to the desired wall outlet.
  • Connect the other end of the USB Cable to the LED Light. Plug the Adapter into the wall outlet.
  • Make sure every Light works. All the lights are turned on means the connection is correct!
  • Try checking the arrow side or direction of small USB PCB Boards if any Lights don’t work.
  1. Unplug the Adapter, then place the Lights face-down on a flat surface.
  • Peel the paper from the Double-Sided Adhesive, and paste one side in the circled back on the Lights.
  1. Find a place to display the Lights. After cleaning and drying the area, press the Adhesive Tape to the wall.
  • The PCB Boards are strong enough to further support the Lights on a Hook, Nail, or Screw (not included).
  1. Plug the Adapter back into the wall outlet. Choose from the Colors or Mode Settings with the remote controller.
  • Remove the insulation sheet from the remote controller before using it .
  1. Free USB Ports on the Lights can be used to charge other devices.
  • Please, DON’T supply power to any other device while the Lights are in White LED Color mode.
  • If ever there are questions about proper electrical usage, consult a licensed technician.